Discussion

Left ArrowBack to discussions page
bsawlorbsawlor Posts: 30Partner Apprentice
I've got a customer who is working on setting up their gripper(s) and is wanting to push the speed.  Unfortunately the activate scripts that are being referenced in the program, potentially are limiting the ability to bump the speed.  Looking at sections 4.3-4.5 in the manual indicate the bytes that need to be altered, but once set, what would the speed actually be?  It seems it could be slower then expected.
Tagged:

Comments

  • louis_bergeronlouis_bergeron Posts: 93Beta Tester Beetle, Wrist Camera URCap 1.3.0, Vacuum Beta tester Handy
    @bsawlor

    Try using our software Robotiq user interface you can found here to manually control the gripper position, speed, and force.  You will then be able to see the gripper speed at the maximum setting of 255.  Visually, the fingertip speed must be around 110 mm/s at maximum speed.  If it's not the case, contact us at [email protected]


    Louis Bergeron
    Integration Coach
    robotiq.com
    [email protected]
  • bsawlorbsawlor Posts: 30Partner Apprentice
    edited November 2017
    @louis_bergeron

    Thanks, that will help confirm the speed it can move at.  Regarding modifying the speed in the program, is there a guide or walk through to do that?  There doesn't seem to be a lot of examples other then the bytes that need to be modified.
Sign In or Register to comment.
Left ArrowBack to discussions page