Home› Robotiq Products
Discussion
Back to discussions page
MIKELCINZA
Posts: 14 Apprentice
Connect the FT300 to a PLC via ethernet IP |
42 views
|
Answered | |
/ Most recent by bcastets |
1 comment |

What material do I need to connect the FT300 to a PLC via ethernet IP?
The refresh rate of my real-time controller is between 2 and 4 milliseconds. I would like the force and torque signal to have as little latency (lag) as possible.
Do I need de UNI-CTR-001-ENIP controler?
The refresh rate of my real-time controller is between 2 and 4 milliseconds. I would like the force and torque signal to have as little latency (lag) as possible.
Do I need de UNI-CTR-001-ENIP controler?
Best Answer
-
bcastets Vacuum Beta tester Posts: 673 Expert
UNI-CTR-001-ENIP is only compatible with our grippers (2F, hand-e, epick, airpick). It won t work with the FT300.
For the FT300 you have to purchase an equivalent devise from a supplier and do the configuration by your own.
We often give https://www.anybus.com/ as a reference to purchase such devise.