Home› Robotiq Products
Discussion
Back to discussions page
ASHIKA
Posts: 2 Recruit
RE: Calibration process |
72 views
|
Answered | |
|
/ Most recent by ASHIKA |
2 comments |
ASHIKA
Posts: 2 Recruit
Hello,
I am trying to calibrate the new wrist camera which is mounted on UR5 arm. During calibration I am getting error as shown below at the end of the 36th pose
"Error 516: Validation ending request failed.Please try to recalibrate again."
To resolve this I tried recalibration couple of times, have changed the position of the arm and I am also using the colored background just to make sure I am not getting this issue due to background color but none of this helped.
Can someone please tell me what I can do to resolve this issue ?
I am trying to calibrate the new wrist camera which is mounted on UR5 arm. During calibration I am getting error as shown below at the end of the 36th pose
"Error 516: Validation ending request failed.Please try to recalibrate again."
To resolve this I tried recalibration couple of times, have changed the position of the arm and I am also using the colored background just to make sure I am not getting this issue due to background color but none of this helped.
Can someone please tell me what I can do to resolve this issue ?
Tagged:
I would recommend you have a look to our elearning video:
https://elearning.robotiq.com/course/view.php?id=5
I was able to calibrate successfully after trying to recalibrate multiple times. Thanks for the info.