I got an answer from them, they did provide me with a user Manual, but i still have no idea how to wire the camera to the controller. I will provide screenshot of the Breakout cable and the controller from UR10e in case if someone can help.
I not familiar with this camera but if it is plug&play with UR, it should come with an URCAP. You may found additional information in the URCAP. There must be a predefined way to connect the camera on the controller.
If it is not plug&play, you will have to go deeper in the document and understand how to communicate with the camera. Then you will have to write a program to handle communication using the I/O of your preference.
Once again I would recommend to get further information from Cognex.
You may found additional information in the URCAP.
There must be a predefined way to connect the camera on the controller.
If it is not plug&play, you will have to go deeper in the document and understand how to communicate with the camera.
Then you will have to write a program to handle communication using the I/O of your preference.
Once again I would recommend to get further information from Cognex.