bcastets
I recommend you send an email will this information at ros@robotiq.com. Our ROS support team may be able to help you.
The Dof Community was shut down in June 2023. This is a read-only archive.
If you have questions about Robotiq products please reach our support team.
If you have questions about Robotiq products please reach our support team.
I am commanding a 2-F Robotiq gripper on a UR5 from my computer (Ubuntu 16.04 - ROS Kinetic). The gripper is connected to my computer via USB at ttyUSB0. At startup, the robotiq driver (https://github.com/StanleyInnovation/robotiq_85_gripper) establishes connection. But after a minute or so, the output of dmesg is
"FTDI USB Serial Device converter now disconnected from ttyUSB0"
Any leads as to what might be causing the issue?