Home› Troubleshooting
Discussion
Back to discussions page
Enric
Founding Pro, Partner, Beta Tester Multi Gripper, Vacuum Beta tester Posts: 113 Handy
2 sensors 2 measurements same end-effector |
41 views
|
Answered | |
/ Most recent by PaulGWF |
1 comment |

Hi,
I currently have 2 FT300 with two UR10 with the same end-effector. I have differences of up to 1kg if i change only the sensor in the calibration process.
I do proces calibrate with 1 sensor and I have a weight of 4.7kg and if I put the other sensor I have 3.8kg.
Where do I have the error?
Enric
I currently have 2 FT300 with two UR10 with the same end-effector. I have differences of up to 1kg if i change only the sensor in the calibration process.
I do proces calibrate with 1 sensor and I have a weight of 4.7kg and if I put the other sensor I have 3.8kg.
Where do I have the error?
Enric
Have you tried to zero the sensor before doing the calibration?
Regards.
Paul