Home Troubleshooting

Discussion

Left ArrowBack to discussions page
Robotiq_CustomerRobotiq_Customer Posts: 123 Apprentice
edited April 2016 in Troubleshooting
Good morning,
          Trying to connect a Motoman DX200 with a 2-finger 85 Gripper, through an Ethernet/IP controller. The green COM light flashes, there is no Fault indicator.

  • Robot is 192.168.0.15 
  • Gripper is 192.168.0.13
  • PC is 192.168.0.11 
Gripper can be controller via USB connection and the User Interface.

It is not connected via USB when I attempt to connect over Ethernet/IP. Even thought the gripper has an IP address set to 192.168.0.13, I am not able to use the User Interface through IP, I have to use a USB cable.

Power has been cycled many, many times. Any thoughts?

Best Answer

Comments

Sign In or Register to comment.
Left ArrowBack to discussions page