Home Programming

Discussion

Left ArrowBack to discussions page
TE_TAYTE_TAY Posts: 8 Apprentice
Help!
I need help, I tried to connect the cognex camera model 7010 to the universal robots model UR10CB3.1 but the screen What should I do,
Thank you in advance for information.

Best Answers

  • TE_TAYTE_TAY Posts: 8 Apprentice
    Accepted Answer

    Yes i install My version is 3.5.12

Comments

  • TE_TAYTE_TAY Posts: 8 Apprentice
     
    How do I fix it?(cognex camera model 7200)
  • mkardasinskimkardasinski Posts: 34 Handy
    You cannot skip the robot calibration if you are expecting to use the Cognex URcap. The calibration is what translates pixels from the camera image to moves of the robot. Secondly, your camera is offline in Easybuilder which is why you are receiving the offline message in the URcap.
  • TE_TAYTE_TAY Posts: 8 Apprentice
    But in my In-Sight Explorer, the system is online. But universal robots still see the system Not online
    And the calibration tool in the In-Sight Explorer program is still not available.
  • TE_TAYTE_TAY Posts: 8 Apprentice
    Yes my Polyscope version  no.3.12.1.90940
    Do I have to check anything more?.To make the devices connect together perfectly
Sign In or Register to comment.
Left ArrowBack to discussions page