Discussion

Left ArrowBack to discussions page
RamonSanchezRamonSanchez Posts: 14 Apprentice
My company recently purchased 2 UR10 with one three-finger gripper each from Robotiq. We are using the Ethernet connection on each one of the robots to communicate with the grippers via TCP/IP. However, we would also like that the two robots communicate between each other. Can we use a simple 2-to-1 Ethernet connector to plug in the gripper in each one of the robots and the cable between the robots or it needs to be done any other way?
Thank you!

Best Answers

Comments

Sign In or Register to comment.
Left ArrowBack to discussions page