One of our customers was looking to automate its polishing process in his factory However, the surfaces can sometimes be complex to program.Here are 2 videos, I made to explain how the path recording and the FT300 can simplify these complex programs.You will see the first video contains a general demonstration of a UR + FT-300/Active Drive Toolbar going over a flat surface. This video shows the ease of programming of the UR with the FT-300/Active Drive Toolbar over a plane. After the first run, you will see that you can increase the speed.https://youtu.be/0m0WfjTeEu0The second video shows the ease of programming over a complex shape. I was able to then reverse the path after its first run. You can really see the true functionalities of the FT-300. This can then allow for a quick set up when programming, instead of constantly rotating a part with such shape to get all sides buffed.https://youtu.be/HCxrf0pe9JsWhat kind of complex application were you able to solved with the path recording and the FT300?