Mount the 2F-85 gripper with GP7

The Dof Community was shut down in June 2023. This is a read-only archive.
If you have questions about Robotiq products please reach our support team.

Categories Discussions

Home > Integration > Mount the 2F-85 gripper with GP7

lakshyz 2021-03-23

I want some help in installing the 2F85 gripper on the GP07 robot as I am unable to mount it. I guess I might require a some coupling/mount and I would appreciate if there is a link or CAD file which i can use?

bcastets 2021-03-24

@lakshyz
To install our gripper you need the following coupling and adaptive plate:

You can download CAD from our support page: https://robotiq.com/support

Installation manual is also available:
https://assets.robotiq.com/website-assets/support_documents/document/Robotiq_202F_20Application_20Note_20190416.pdf

lakshyz 2021-03-25

Thank you so much for the response. Can I buy it off the shelf or do i need to say 3D print it ( Adaptor plate) and is there a kink for coupling where I can buy?

Thank you!

bcastets 2021-03-26

@lakshyz
You can buy off the shell. Your local distributor should be able to advise.