Home› Integration
Discussion
Back to discussions page
Catherine_Bernier
Posts: 144 Handy
Email Notification when Robot Cell has Stopped |
276 views
|
Answered | |
/ Most recent by Catherine_Bernier
in Integration
|
2 comments |

in Integration
One of our distributor, Axis New England, just uploaded the full procedure to be able to send an email notification if the robot cell using Universal Robotsstops for any reason.
They are using MOXA's ioLogik and MGate products to make that possible and this is also doable since the UR robot has an open Modbus Dashboard Server.
Check out the video here:
https://youtu.be/IkJiUY2II94
Do you have similar notification systems in your plant or at your customers plant?
Please Share Below!
They are using MOXA's ioLogik and MGate products to make that possible and this is also doable since the UR robot has an open Modbus Dashboard Server.
Check out the video here:

Do you have similar notification systems in your plant or at your customers plant?
Please Share Below!
Catherine Bernier, Jr. Eng.
Tagged:
Unfortunately, ARCS 1.0 (AIRGATE Robot Communication Solution 1.0) does not send email, so if that is the preferred method of communication then MOXA's ioLogik and MGate would be the way to go!
[email protected]
https://www.linkedin.com/in/catherinebernier