Controller communication through Ethernet/IP
/ Most recent by Etienne_Samson
I'm trying to communicate with the controller though Ethernet/IP connection, however all my attempt were unsuccessful. I even try installing the user interface legacy (v 1.0.6).
I figured out that there is no connection whatsoever though the Ethernet port of my Desktop though control panel --> networks and Internet --> network and sharing center. Which doesn't show the any Ethernet connection. I even try to use different cable and cmd prompt "ping 192.168.1.11" but fail.
However I can connect and used the gripper using the USB to USB port. Could it be that the Ethernet port is faulty?