Discussion

Left ArrowBack to discussions page
SebastienSebastien Posts: 198 Handy
Hi pros, 
in all other robot brands than UR, usually you can find forces generated during normal operation and during e-stop in all directions. This helps us design correct suctures that are strong enough to support these. Do you know where I can find these for UR robots?

Comments

  • David_GariepyDavid_Gariepy Posts: 25 Handy
    edited March 10
    I couldn't directly find this information but this might be helpful : https://www.universal-robots.com/how-tos-and-faqs/faq/ur-faq/cb3-stop-performance-17740/
  • matthewd92matthewd92 Posts: 403Founding Pro, Tactile Sensor Beta Testers Handy
    Here is some information on how much torque each joint is capable of, not sure if this is what you are looking for either but at least can give you an idea of how much torque the base joint is capable of putting into the stand.
  • SebastienSebastien Posts: 198 Handy
    @matthewd92
    We are looking at a project where we need UR10 on a rail system. Rail companies are asking us about forces generated by the robot on the tracks. Do you have tips for this?
  • matthewd92matthewd92 Posts: 403Founding Pro, Tactile Sensor Beta Testers Handy
    YOu could calculate the momentums if you know what you velocity is going to be for starting and stopping obviously.  I know RTDE broadcasts momentums, probably in one of the modbus registers as well. I will try to look when I don't have my head under a robot later today. Using that you could run your program and see what types of momentum you are seeing at the base. There is also a script function for returning the joint torques.  
Sign In or Register to comment.
Left ArrowBack to discussions page